Komatsu PC130-8 Final Drive

Part Number
22B-60-22110
CHECK INVENTORY
New Komatsu PC130-8 Final Drive

Up to three-year, unlimited-hour warranty.

Same day shipping. Coast to coast Canada.

If you’re not sure which final drive motor you need for your machine, contact us.

Why choose and Dyco?

and Dyco brands provide you with quality new replacement components options for most major makes and models of excavators and forestry swing machinery.

Their products are manufactured at world class OEM facilities in Europe, South Korea, and Japan, and distributed throughout the world market.

Final Drive Maintenance

Don’t know how best to service your final drive? Here's some guidance to help.

Routine Maintenance

Always follow the original machine manufacturers procedures where available. The advice we give is general and cannot take into account all working conditions or any particular use.

However, ensure that the oil is checked monthly and top up if necessary.

Final Drive Servicing Intervals

We recommend you change the oil every 250—500 hours or at least once a year depending on usage.

The life of a final drive gearbox is generally proportional to the frequency of its oil changes.

  • Drain the gearbox oil while it is hot so that it is easier to drain.
  • Check that there are no metallic parts in the oil.
  • Re-fill the gearbox with new oil. It is usual to fill the gearbox approximately half full — See table below.
  • Do not mix different types of oil.
  • Check for leaks. Pay particular attention to the main hub mechanical seal (floating seal) found between the sprocket and track frame. If oil is found leaking from here it can be indicative of more serious problems so stop the machine and have the seal changed at once.
  • Check the track tension, a tight track chain puts strain on the hub bearings and can lead to premature gearbox failure.

Gearbox Oil

We recommend:

Shell Omala EP220
Esso / Exxon Spartan EP220
BP Mach Energol GR-HP220
Mobil Mobilgear 630
Elf Rebuiltelf SP220
Agip Blasia 220